295 is the tyre width in millimetres, 40 is the sidewall height as a percentage of the width, and R24 means it fits a 24-inch rim. You should also match the load index and speed rating shown on your current tyres or vehicle placard. If your vehicle uses different sizes front and rear, confirm the exact size for each axle before ordering.

Check the tyre size on the sidewall of your current tyres and compare it with the size listed on the driver door jamb sticker or in the handbook. Because this is a 24-inch fitment, it only suits vehicles with 24-inch wheels and the correct rim width. Also confirm the required load and speed ratings, as heavier SUVs often need higher specifications.

Use the vehicle placard or handbook as the first reference, then choose a load index and speed rating that meets or exceeds those requirements. This size is commonly fitted to heavy SUVs, so selecting the right load rating is critical for stability and wear. If you tow or regularly carry heavy loads, stick to the manufacturer specification and avoid dropping the load index.

Availability can be limited because 24-inch tyres are a more specialised size, but some manufacturers do offer all-season patterns. If you need true winter capability, look for tyres marked with the 3PMSF symbol and consider whether a smaller winter wheel-and-tyre set is recommended for your vehicle. Always match any seasonal tyre choice to your vehicle’s required load and speed ratings.

It is best to keep the same brand, model and tread pattern across each axle to maintain predictable handling and braking, especially with wide 24-inch tyres. If you are replacing a single tyre, match the existing tyre as closely as possible in size, specification and wear level. When the remaining tyre on the axle is significantly worn, replacing tyres in pairs is usually the safer option.