Many options in this size are designed for heavier vehicles and often come with higher load indices, commonly in the 107 to 114 range depending on the tyre model. Check the tyre placard (door shut area) or your handbook for the exact load index your vehicle requires, then choose the same or higher rating. If you regularly carry passengers, tow, or drive with a loaded boot, prioritise the correct load index over price alone.

Match the speed rating shown on your current tyres or the vehicle placard, and do not go below the manufacturer requirement. In this size you will often see ratings like H or V, but the right choice depends on the vehicle and trim. If you mainly drive on UK motorways, choosing the correct speed rating helps maintain stability, braking performance and insurance compliance.

Yes, all-season and winter tyres are widely available in this size, but you should keep the same size and meet the required load and speed ratings. For winter use, look for the 3PMSF marking to confirm cold-weather certification. If you drive in mixed UK conditions, an all-season option can be a practical year-round choice, while dedicated winter tyres are best for frequent trips in snow or near-freezing temperatures.

Yes, many tyres in this size are offered with XL (Extra Load) construction or reinforced markings, which can better suit heavier SUVs and towing setups. XL does not automatically mean it is correct for your vehicle, so always match the load index specified by the manufacturer. If your current tyres are XL, replacing them like-for-like is usually the safest route unless your vehicle handbook states otherwise.

The correct pressure is set by the vehicle manufacturer, not by the tyre size alone, and it can vary for front and rear axles and for loaded driving. Check the pressure label on the driver door shut or fuel flap, then set pressures when the tyres are cold. If you notice uneven wear across the tread on this wider 245 mm size, recheck pressures and get the alignment inspected before fitting a new set.